- Our dockboards are made of either
Aluminum or Steel and can handle capacities from 10,000 to 20,000
lbs. They are made for heavy duty loading applications with either
an electric pallet jack or gas or electric forklift. All of our
dockboards come with steel curbs for extra reinforcement.
- Our dockplates are made for non-powered loading applications, such as hand trucks or manual pallet
jacks. Every dockplate has machine beveled edges for smooth transitions.
There are a wide range of sizes and capacities available.
Ramps - Yard ramps
provide access to trailers when a dock is not available. They
are also useful for dock-to-ground applications. All yard ramps
are made of steel welded construction and capacities range from
16,000 to 60,000 lbs.
Levelers - Dock
levelers are designed to have a working range of 5" above
and 5" below the dock. With capacities ranging from 20,000
to 25,000 lbs, dock levelers are made for heavy duty applications.
Bumpers - Our
replacement dock bumpers are manufactured from fiber reinforced
prime rubber containing nylon and polyester. All molded bumpers
have an impact recovery of 95% with a durometer reading of 80
plus or minus 5 and a tensile strength of 950 - 1505 psi. All
of our molded dock bumpers have pre-drilled, counter sunk holes
to accept 3/4" anchor bolts.
Truck Ramps - The
Handi-Ramp® Pickup Truck Loading Ramp replaces the tailgate
on your pickup truck and is spring assisted for easy lifting.
The Handi-Ramp® Pickup Truck Loading Ramp, is designed to
allow one person to load and unload quick and easy. This heavy-duty
folding pickup truck ramp is designed to handle up to 1800 lb.
Risers - With
wheel risers, you can eliminate unsafe, below dock loading conditions.
Wheel risers allow trailers to be positioned properly above a
dock for more efficient loading. With widths of 18" and 24",
our wheel risers can accommodate both single, dual, or tandem
Chalks - Our
wheel chalks are manufactured from fiber reinforced prime rubber
containing nylon and polyester. They have an impact recovery of
95% with a durometer reading of 80 plus or minus 5 and a tensile
strength of 950 - 1505 psi.